大学生村官工作心得体会

Powerint 公司的150W街灯LED照明方案是采用HiperPLC PLC810PG 器件.该器件集成了PFC和LLC控制器,140VAC时满负载PFC效率大于95%,而满负载LLC效率大于95%,输入电压高达230VAC,功率150W,主要用作街灯LED照明供电.本文介绍了参考设计DER 212的主要特性,详细电路图以及PCB布局图和所用材料清单.150 W Power Factor Corrected LLC Power Supply Using HiperPLC Summary and FeaturesIntegrated PFC and LLC controllerContinuous mode PFC using small low-cost ferrite core and magnet wireFrequency and Phase locked PFC an❤d LLC for ripple cancELlation in bulk capacitor for reduced ripple current, reduced bulk capacitor size and reduced EMI filter costTight LLC duty-cycle matchingTight LLC dead-time control>95% full load PFC efficiency at 140 VAC using conventional ultrafast rectifier>95% full load LLC efficiency>92% full load 웃system efficiencyThis engineering report describes a 150 W reference design power supply for 230 VAC input LED street lights and also serves as a general purpose evaluation board for the PLC810PGThe design is based on the PLC810PG controller IC which integrates both continuous current mode boost PFC and resonant half-bridge control functions together with high-side and low side driv¿ers for the LLC stage MOSFETs. To allow optimum design of the LLC transformer for high efficiency the design operates in burst mode at zero load. The supply is thus protected against output overvoltage at low/zer℃o load, but it will not deliver a steady output voltage at zero load. A practical LED street light power supply design that includes an auxiliary output winding to power the LED driver circuitry may not have this limitation.DER-212 demonstrates a design using the commonly employed single transformer and resonant inductor magnetic component for the LLC stage ศ. However, the PLC810 may as easily be used